signal conditioners  


Click on a model number below to open the PDF document in a new window.

Series
Model
 Description
VM-11
 Rotating machinery such as pumps and motors in oil refineries, petrochemical and iron & steel plants are periodically checked by the operator using a portable vibration meter as a part of equipment diagnosis.
VM-11
 This signal conditioner receives displacement input vibration signals from the VK-202A Transducer and converts the signals to an isolated signal of 4 to 20mADC (or 1 to 5VDC) proportional to the input signal.
VM-11
 This signal conditioner receives velocity input vibration signals from the CV Series Velocity Transducers installed on rotating machinery and converts the signals to an isolated signal of 4 to 20mADC (or 1 to 5VDC) proportional to the input signal.
VM-11
 This signal conditioner receives acceleration input vibration signals from the CA Series Acceleration Transducers installed on rotating machinery and converts the signals to an isolated signal of 4 to 20mADC (or 1 to 5VDC) proportional to the vibration value.
VM-11
 The VM-11A Vibration Signal Conditioner is used to convert vibration signals from the CA Series Acceleration or CV-86 Piezo-electric Velocity Transducers installed on rotating machinery into isolated signals of 4 to 20mADC (or 1 to 5VDC ).
VM-11
 This signal conditioner receives displacement input signals from the VK-202A Transducers installed on rotating machinery and converts the signals to an isolated signal of 4 to 20mADC (or 1 to 5VDC) proportional to the thrust (shaft position).
VM-11
 The VM-11P LVDT Signal Conditioner is used to convert signals from the LS series LVDT installed on rotating machinery into isolated signals of 4 to 20mADC(or 1 to 5VDC) proportional to the position.
VM-11
 This signal conditioner receives revolution input signals from the RD Series Tacho Driver, VK Series Transducer or MS Series Magnetic Pickup installed on rotating machinery and converts the signals to an isolated signal of 4 to 20mADC (or 1 to 5VDC).
VM-11
 The VM-11S Vibration Switch is compact and low cost and is used to input signals from the CA Series Acceleration or CV-86 Velocity Transducers and output contact signals when the current vibration value exceeds the set value.

Top

Product Listings

Additional Information