Model |
Description |
| |
The VT-1B Driver Housing is a drip-proof
housing which can accommodate the VK or RD Series Drivers.
The VT-1B must be used when the VK-A Series is used for
intrinsic safety explosion-proof construction. |
| |
The Barrier Enclosure is a drip-proof box
which can accommodate the safety barrier. |
| |
The Safety Barrier made by MTL Co. (England)
with intrinsic safety explosion-proof construction is
used in the VK Series Transducer. |
| |
The Safety Barrier made by MTL Co. (England)
with intrinsic safety explosion-proof construction is
used in the CA-301 Acceleration Transducer. |
| |
Junction box with junction terminal board
for shielded cable. |
| |
Junction box with junction terminal board
for shielded cable. |
| |
Junction box with junction terminal board
for shielded cable. |
| |
Junction box with junction terminal board
for shielded cable. |
| |
The VZ-1C Junction Connector is a drip-proof
type connector which connects sensors and extension cable
for a VC Converter. |
| |
The VZ-1C Junction Connector is a drip-proof
type connector which connects sensors and extension cable
for a VC Converter. |
| |
This is a drip-proof cover for the VZ-1A
Junction Connector |
| |
The VZ-3A Sensor Mounting Bracket is used
to fix the VK-A Series VL Sensor to the inside of the
machine case. |
| |
The VL Sensor External Mounting Kit is
used when the sensor can be installed easily into a narrow
space from outside of the machine case by only adjusting
the sleeve length to the required length. |
| |
The VL Sensor Internal Mounting Kit is
used when the sensor is installed adjacent to the shaft
in the machine case and the sensor cable is pulled out
through the machine case. |
| |
Applicable cable size (cable diameter):
Ø2mm, Ø3.5mm : For 1 |
| |
Applicable cable size (cable diameter)
: Ø5mm : For 1 or Ø3.5mm : For 2 |
| |
The VZ-5A Sensor Housing is used to mount
the VK-A Series VL Sensor in the machine case with the
VZ-10A Sensor Sleeve and the VZ-7A Adapter. |
| |
The VZ-7A Adapter is used to mount the
VK-A Series VL Sensor in the machine case with the VZ-10A
Sensor Sleeve and the VZ-5A Sensor Housing. |
| |
The VZ-7B Adapter is used to mount the
VK-A Series VL Sensor in the machine case with the VZ-4C
Cable Seal and the VZ-9A Junction Box. |
| |
The VZ-9A Junction Box is used to mount
the VK-A Series VL Sensor in the machine case with the
VZ-4C Cable Seal and the VZ-7B Adapter. |
| |
The VZ-9B Junction Box used to protect
the cable and coax. connector which are withdrawn from
the machine case when the VZ-9A Junction Box can not be
directly installed with the machine case. |
| |
The stud thread is used for mounting the
Vibration Transducer |
| |
The mounting base for the CA Series Transducer
is used to mount the threaded and adhered type. |
| |
This tool is convenient for calibration
when the target currently used for the VC Series Displacement
Vibration Transducer is changed. |
| |
The VZ-10A Sensor Sleeve is used to install
the VK-A Series VL Sensor in the machine case using the
VZ-10A Sensor Sleeve and the VZ-7A adapter. Specify the
size of the machine case to the rotor surface. The drawing
shows how to determine the VZ-10A Sensor |
| |
The Model VZ-35A Calibration Kit is a calibration
device that provides mechanical reference vibration and
displacement inputs to the monitoring system. |
| |
Operating temperature range: -40 to +120°C
(-40 to +248°F) |
| |
Operating temperature range: -35 to +135°C
(-31 to +275°F) |
